The power button is located on the top of the camera. Press and hold the power button for 2 seconds. The LED lights up to indicate that the power is on.

Interval shooting is a feature available in the official app that enables continuous shooting at 3-second intervals for 3, 6, 11 or 21 photos.

There is no maximum number of Pre-shutter sounds that can be recorded on the app. However, sounds are saved by group, and up to five can be saved per group. The number of groups is also unlimited.

A. Printing from the app:
1） Tap the gallery icon. Thumbnails of your captured images are displayed.
2） Select the photo you want to print.
3）Tap[ print ].
4） Select your device. The app for the device you have selected will then launch.
5) Tap the print button（ print Button ）or swipe the screen. Your image will then print. The number of images to print can also be selected during image transfer.
6) Pair your printer with your smartphone.
7) Once your image has been printed, you can remove it by grabbing it from the top edge. The amount of remaining film can be checked on your smartphone.

2. Printing directly from an INSTAX Link series smartphone printer without going through the app:
1） Flip the mode selector switch to ""L"". The camera enters ""Link"" Mode.
2） Connect the camera to your printer. When the camera and printer are turned on and placed close to each other, the LED will light up green, and they will connect automatically.
3） Take and print a photo. After you take a photo with your camera, the image is automatically sent to the printer and printing starts.

Delete images from internal memory by following the steps below:
1 Deleting selected images:
Tap the settings icon on the app's home screen. Next, tap [Settings], [Operation settings], [Media restrictions], then [Internal media]. Select the images you want to delete, then tap [Delete].
2 Deleting all images:
Tap the settings icon on the app's home screen. Next, tap [Settings], [Operation settings], [Initialize media], then [Internal media].

You need to charge your INSTAX Pal™ before using it for the first time. Charge it for approximately two hours to ensure the battery is full before use.